Available in size: 1/4" to 2", and 8mm to 25mm

Working temperature:-325ºF~800ºF (-198ºC~426ºC)

Material grades:  SS 316,  Special Alloys

Thread: NAI LOK Port to Male AN

Zero leakage even under tough working conditions

High quality silver plated threads on nuts to ensure no galling on the body threads

Simple to operate and save time and cost because of the usage of elastic seal

Port Connector Installation 

Remove nut and ferrules from the first of two NAILOK ports to be connected.

Slip out ( no ferrules) over machined ferrule end of port connector.

Insert port connector into NAILOK port 1 and snug by hand.

Tighten with wrench 1/4 turn only.For 1/8,3/16in. 2,3,and 4mm tube fittings,tighten only 1/8 turn.

Subsequent connections are made by tightening slightly with a wrench after snugging the nut by hand.

Insert other end of port connector into NAILOK port 2 and tighten nut 1 1/4 turns from finger-tight.

For 1/16, 1/8, 3/16 in, 2,3, and 4mm tube fittings, only 3/4 turn from finger-tight is necessary.